Products
| 7 - 8 of 10 |
Smoke Alarm (Model : ML-VIII)
- HOW TO INSTALL
SPECIFICATIONS
|
|
SUMMARY
ML-VIII are photoelectric smoke alarms, they are generally more effective at detecting smoldering fires which smolder for hours before bursting into flame.
Sources of these fires may include cigarettes burning in couches or bedding.
ML-VIII accords with the ISO / DIS12239 Standard.
TEST
It is important to test this unit weekly to make sure it is working properly. Don't open the alarm by yourself, return them to the seller if improperly ,and don't use fire to test your alarm.
OPERATION
STEP TO TEST
- Press and hold the test button on the cover of the unit until the alarm sounds. If it does not alarm, make sure that the unit is receiving power and test it again. If it still does not alarm ,replace it immediately or check your battery.
- The signal flashes once 30 seconds and while it alarms the signal will flash once 0.5 second.
- If the alarm makes low "chirp "sounds every about 30seconds,it tells you to exchange your battery.
- Little smoke will not cause alarms, so misinformation occurs only when you blow smoke to the alarms directly or you forget to turn on your ventilated facility white your cooking.
- Sometimes when you smoke the unit will alarm ,so you can just blow air to it to stop alarming.
Maple Leaves Int'l Of Canada
Tested following ISO/DIS 12239
Safety Night Lamp (Model : ML-VI)
- Mapleleaf Trailer
SPECIFICATIONS
|
|
SUMMARY
The ML-VI a new type of energy saving motion sensor lamp; the light become brighter and service time longer, When reached a certain degree of illumination, it adopts PIR technology to sense motion and turn on the light automatically; It can identify day and night automatically, at night when one enters its detection field, the lamp will shine and after leaves it will go out automatically. If you want the light to remain on for an extended period of time, just slide the switch to the"ON"setting to turn the light on and keep it on, until you turn the switch off.
OPERATION
ATTENTIONS
- The product shouldn't be used in the zones the air temperature changes obviously: for example air conditioning and air heating;
- In front of the detection window there should be no obstruction or moving object to effect its detecting.
PROBLEM AND SOLUTIONS
| The sensor sensitivity is low | The sensor sensitivity is low |
|
|
Maple Leaves Int'l Of Canada
ISO9001/IS014001
| 7 - 8 of 10 |